GI Pole

We are engaged in manufacturing and supplying the premium quality of SIGNAGE Pole. Recognized for their durability, compact design, alluring appearance and resistance against harsh weathering conditions

Material used are based on the following standards Octagonal Poles : HT Steel Conforming to grade S355JO or equivalent Base Plate : Fe 410 conforming to IS 226/IS 2062 Foundation Bolts : E.N.B. grade Design : The Octagonal Poles are designed to withstand maximum wind speed as specified in IS875. The top loading area and the weight of fixtures are considered while calculating the maximum deflection of the pole and to meet the requirement of BS : 5649 Part VI 1982. Pole Shaft : The Pole shafts have octagonal cross section and are continuously tapered with single longitudinal welding. There are no circumferential welding. They are provided with rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. This base plate is fillet welded to the pole shaft from inside and outside. The welding is done by MMAW process. Door opening : The octagonal poles have a door of approximate 500 mm length at the elevation of 500 mm from the Base plate. The door is vandal resistant and weather proof to ensure safety of internal connections. The door is flush with the exterior surface and has suitable locking arrangement. There is also a suitable arrangement for earthling. The poles are adequately strengthened at the location of the door. Welding : Welding is carried out confirming to approved procedures duly qualified by third party inspection agency. The welders are qualified for welding octagonal shafts. Pole Section : The Octagonal Poles are in single section (up to 9 meters) without any circumferential weld joint. Galvanizing The poles are hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 70 micron. The galvanizing is done by single dipping Fixing Type : The poles are hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 70 micron. The galvanizing is done by single dipping

Flag Mast Pole : A small step to build a nation of strength and solidarity. A Flag signifies strength and respect and it captivates honor of one and all. We feel pride in manufacturing excellent quality flag poles that can bear the flag high at all costs and during any weather conditions. Our specifically designed flag poles have the solidity to withstand any natural disaster. We offer customized Flag Poles to our clients along with accompanying accessories. The height of the flag pole is completely demand dependent. Our current manufacturing trend with respect to height ranges from 20 Mtr to 40 Mtr. ATS ENERGIES PRIVATE LIMITED have always been adaptable to the client’s demands. The design of the flag mast is an important step in our process, as the flag poles not only have to bear all sorts of weather, but, as in the case of the tallest flag mast, it also has to tolerate wind speed and pressure due to its