ATS Energies Private Limited

Material used are based on the following standards Octagonal Poles : HT Steel Conforming to grade S355JO or equivalent Base Plate : Fe 410 conforming to IS 226/IS 2062 Foundation Bolts : E.N.B. grade Design : The Octagonal Poles are designed to withstand maximum wind speed as specified in IS875. The top loading area and the weight of fixtures are considered while calculating the maximum deflection of the pole and to meet the requirement of BS : 5649 Part VI 1982. Pole Shaft : The Pole shafts have octagonal cross section and are continuously tapered with single longitudinal welding. There are no circumferential welding. They are provided with rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. This base plate is fillet welded to the pole shaft from inside and outside. The welding is done by MMAW process. Door opening : The octagonal poles have a door of approximate 500 mm length at the elevation of 500 mm from the Base plate. The door is vandal resistant and weather proof to ensure safety of internal connections. The door is flush with the exterior surface and has suitable locking arrangement. There is also a suitable arrangement for earthling. The poles are adequately strengthened at the location of the door. Welding : Welding is carried out confirming to approved procedures duly qualified by third party inspection agency. The welders are qualified for welding octagonal shafts. Pole Section : The Octagonal Poles are in single section (up to 9 meters) without any circumferential weld joint. Galvanizing The poles are hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 70 micron. The galvanizing is done by single dipping Fixing Type : The poles are hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 70 micron. The galvanizing is done by single dipping

Material used are based on the following standards Octagonal Poles : HT Steel Conforming to grade S355JO or equivalent Base Plate : Fe 410 conforming to IS 226/IS 2062 Foundation Bolts : E.N.B. grade Design : The Octagonal Poles are designed to withstand maximum wind speed as specified in IS875. The top loading area and the weight of fixtures are considered while calculating the maximum deflection of the pole and to meet the requirement of BS : 5649 Part VI 1982. Pole Shaft : The Pole shafts have octagonal cross section and are continuously tapered with single longitudinal welding. There are no circumferential welding. They are provided with rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. This base plate is fillet welded to the pole shaft from inside and outside. The welding is done by MMAW process. Door opening : The octagonal poles have a door of approximate 500 mm length at the elevation of 500 mm from the Base plate. The door is vandal resistant and weather proof to ensure safety of internal connections. The door is flush with the exterior surface and has suitable locking arrangement. There is also a suitable arrangement for earthling. The poles are adequately strengthened at the location of the door. Welding : Welding is carried out confirming to approved procedures duly qualified by third party inspection agency. The welders are qualified for welding octagonal shafts. Pole Section : The Octagonal Poles are in single section (up to 9 meters) without any circumferential weld joint. Galvanizing The poles are hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 70 micron. The galvanizing is done by single dipping Fixing Type : The poles are hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 70 micron. The galvanizing is done by single dipping

Material used are based on the following standards Octagonal Poles : HT Steel Conforming to grade S355JO or equivalent Base Plate : Fe 410 conforming to IS 226/IS 2062 Foundation Bolts : E.N.B. grade Design : The Octagonal Poles are designed to withstand maximum wind speed as specified in IS875. The top loading area and the weight of fixtures are considered while calculating the maximum deflection of the pole and to meet the requirement of BS : 5649 Part VI 1982. Pole Shaft : The Pole shafts have octagonal cross section and are continuously tapered with single longitudinal welding. There are no circumferential welding. They are provided with rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. This base plate is fillet welded to the pole shaft from inside and outside. The welding is done by MMAW process. Door opening : The octagonal poles have a door of approximate 500 mm length at the elevation of 500 mm from the Base plate. The door is vandal resistant and weather proof to ensure safety of internal connections. The door is flush with the exterior surface and has suitable locking arrangement. There is also a suitable arrangement for earthling. The poles are adequately strengthened at the location of the door. Welding : Welding is carried out confirming to approved procedures duly qualified by third party inspection agency. The  welders are qualified for welding octagonal shafts.

We are engaged in manufacturing and supplying the premium quality of LIGHTING  POLES & Lights. Recognized for their durability, Heights and Designs, alluring appearance and resistance against harsh weathering conditions

Material used are based on the following standards Octagonal Poles : HT Steel Conforming to grade S355JO or equivalent Base Plate : Fe 410 conforming to IS 226/IS 2062 Foundation Bolts : E.N.B. grade Design : The Octagonal Poles are designed to withstand maximum wind speed as specified in IS875. The top loading area and the weight of fixtures are considered while calculating the maximum deflection of the pole and to meet the requirement of BS : 5649 Part VI 1982. Pole Shaft : The Pole shafts have octagonal cross section and are continuously tapered with single longitudinal welding. There are no circumferential welding. They are provided with rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. This base plate is fillet welded to the pole shaft from inside and outside. The welding is done by MMAW process. Door opening : The octagonal poles have a door of approximate 500 mm length at the elevation of 500 mm from the Base plate. The door is vandal resistant and weather proof to ensure safety of internal connections. The door is flush with the exterior surface and has suitable locking arrangement. There is also a suitable arrangement for earthling. The poles are adequately strengthened at the location of the door. Welding : Welding is carried out confirming to approved procedures duly qualified by third party inspection agency. The welders are qualified for welding octagonal shafts. Pole Section : The Octagonal Poles are in single section (up to 9 meters) without any circumferential weld joint. Galvanizing The poles are hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 70 micron. The galvanizing is done by single dipping Fixing Type : The poles are hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 70 micron. The galvanizing is done by single dipping

A Street Light Pole is a sturdy, weather-resistant structure designed to support street lighting for roads, highways, residential areas, and commercial spaces. These poles come in different materials, heights, and designs to meet various lighting and aesthetic requirements.

A Street Light Pole is a sturdy, weather-resistant structure designed to support street lighting for roads, highways, residential areas, and commercial spaces. These poles come in different materials, heights, and designs to meet various lighting and aesthetic requirements.

A Street Light Pole is a sturdy, weather-resistant structure designed to support street lighting for roads, highways, residential areas, and commercial spaces. These poles come in different materials, heights, and designs to meet various lighting and aesthetic requirements.

A High Mast Pole is a tall, heavy-duty pole designed for large-area lighting in highways, stadiums, ports, railway yards, and industrial zones. These poles are engineered to support multiple floodlights at great heights, ensuring uniform and high-intensity illumination.

A Street Light Pole is a sturdy, weather-resistant structure designed to support street lighting for roads, highways, residential areas, and commercial spaces. These poles come in different materials, heights, and designs to meet various lighting and aesthetic requirements.

A Street Light Pole is a sturdy, weather-resistant structure designed to support street lighting for roads, highways, residential areas, and commercial spaces. These poles come in different materials, heights, and designs to meet various lighting and aesthetic requirements.

A Tubular Steel Pole is a strong and versatile pole used for street lighting, transmission lines, signage, CCTV mounting, and other utility applications. These poles are made from mild steel (MS) or galvanized steel (GI) and are designed for high durability and load-bearing capacity.